Serial RS232 RS485 to Ethernet Server Httpd Client/ Modbus TCP/DNS/DHCP
TCP232-410SSerial to Ethernet Converter, Modbus RTU to TCP
Industrial Serial RS232 RS485 to Ethernet Converter
- RS232/RS485 ports can work simultaneously
- Modbus RTU to Modbus TCP, Modbus Polling
- Flow Control: CTS/RTS, XON/XOFF
Based on TI Cortex M4 Solution, signal processing more efficient and reliable.
Equipped with optimized TCP/IP protocol stack, stable and reliable, which can realize bi-directional transparent transmission efficiency.
Work Temp: -40 ~85C, Supports hardware watchdog to keep it work stable.
Registration Packet + Bi-directional Heartbeat Packet
+ Keep Alive
When 410s works as a TCP Client,it will automatically send pre-registered packets for TCP Server
to identify this TCP. Network+Serial port heartbeat packet+Keep Alive,
maintain heartbeat connection with device terminals and servers actively, ensure the stability of the system.
Electrical Fire Network Monitoring
410S communicates with the RS232/485 serial port of the electric fire alarm, and transmits the alarm
information to the cloud platform quickly to remind the staff to eliminate the fire.
Smart Lighting Facilities in Factories and Mines Monitoring
The traditional lighting facilities in factories and mines are mostly controlling by people,
and cannot realization linkage between manufacture and monitoring, and lead to energy wasting.
410s communicates with serial lighting equipment via network,
it is convenient for lighting control and can initiative report the mistakes of the equipment.
Water Supply System Monitoring
Recently the hoc communication of water supply system in waterworks is still based on serial,
and it is only suitable for single-machine operation and limited transmission distance, system maintenance is difficult.
410s supports serial port to network, monitor the work of the equipment via TCP Server mode at any time.
System Information Processor Cortex-M4 Basic Frequency 120MHz Flash 512K byte Ethernet Port Number 1 Interface Standard RJ45 Rate 10/100 Mbps MDI/MDIX, auto switch between cross and direct connection Protection 2KV electromagnetism isolation, shell insulation blocking Network Protocol IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, Web socket, Httpd client Receive Buffer Max 16k bytes buffer Serial Port Number 2 (1*RS-232, 1*RS-485, can work at the same time) Interface Standard RS-232: DB9 pin type, RS-485: 3 wire (A+, B-, G) Data Bits 5, 6, 7, 8 Stop Bit 1, 2 Check Bit None, Even, Odd, Space, Mark Baud Rate RS-232: 600 bps ~ 230K bps, RS-485: 600 bps ~ 1M bps Flow Control RTS/CTS Buffer Send and receive 2k bytes respectively Protection RS-485: anti-static 2KV, lightning protection RS-485 Pull-up and Pull-Down Resistor 2.2 KΩ Software Virtual Serial（USR-VCOM） Windows 2000 or higher (32 bit/64 bit) Configuration Built-in webpage, computer set-up software, serial command Basic Parameter Size 80 x 62 x 24 mm Operating Temp. -40 ~ 85°C Storage Temp. -45 ~ 105°C, 5 ~ 95% RH Input Voltage DC 5 ~ 36V Working Current86.5mA(aver)@ 5V44.3mA(aver)@ 12V Power <1W More Certificate CE,FCC,ROHS Warranty 2 years Accessory 5V1A high-quality power supply, serial line, cable