TCP232-ED2
Triple Serial TTL UART to Ethernet TCP/IP Module With New Cortex-M4 Kernel
Description
TCP232-ED2 Serial Ethernet Module is to transmit data from serial TTL UART to ethernet,which has characters of low price, high speed and high stability.
TTL & Ethernet Bidirectional Transmission
TCP232-ED2 is a triple serial ethernet module, which supports 3*TTL working at the same time. It adopts Cortex-M4 solution and its basic frequency is up to 120MHz. And the internal of the module integrates TCP/IP protocol stack.
Webpage ConfigurationNew Cortex-M4 KernelTriple TTL Serial
TCP232-ED2 Evaluation Board : TCP232-EVBProduct Features of ip module
- New Cortex-M4 kernel, industrial working temperature range(-40~85℃), elaborate optimization TCPIP protocol stack, stable and reliable.
- selectable UART port, Different port can be used together, work independently, distinguish the connected serial port via port number.
- Auto-MIDX function, discretionarily connect cross-over or direct network cable, automatic switching.
- Support TCP Server, TCP Client, UDP, UDP Server, HTTPD Client,websocket, various of ethernet protocols.
- Support virtual serial port, provide corresponding software.
- Serial port highest baud rate from 600bps to 1024000bps(COM0 only max 256000bps).
- wide voltage input, more applications.
- Support DHCP, automatically access IP, can inquire the facility within network through the UDP broadcast protocol(using software USR-TCP232-E45 Setup).
- Supply the protocol for VIP customers
- Provide PC TCP/IP SOCKET programming example, VB, C++, Delphi, Android, IOS.
- A built-in web page, also parameter setting via web, can customize web pages for users.
- Can also set via UDP broadcast, provide the set up protocol.
- Reload button, a key restore default Settings.
- RJ45 status indicator light, RJ45 interface built-in isolation transformer, 2 KV isolation.
- The global unique MAC address bought from IEEE, the user can define MAC address (please state when you make order).
- Support upgrade firmware via network.
- Support visit IP and domain name at the same time
- Support up to 8 link from client when act as TCP Server, same data will be send to all client.
- Can modify http server port from default port 80 for module built-in http server.
- Support Keepalive, detect a dead link quickly and make sure the connection more stable.
Product Specification
System Information
- Processor
- Cortex-M4
- Basic Frequency
- 120MHz
- Flash
- 512K byte
Ethernet
- Port Number
- 1
- Interface Standard
- 4 pin interface (without network transformer) TX+,TX-,RX+,RX-
- Rate
- 10/100 Mbps,MDI/MDIX,auto switch between cross and direct connection
- Protection
- 1.5KV electromagnetism isolation
- Network Protocol
- IP,TCP,UDP,DHCP,DNS,HTTP,ARP,ICMP,Web socket,Httpd client
- Receive Buffer
- Max. 16k bytes buffer
Serial
- Port Number
- 3 (3*TTL,can work at the same time)
- Interface Standard
- TTL: 2.54 pin 3.3V
- Data Bits
- 5,6,7,8
- Stop Bit
- 1,1.5,2
- Check Bit
- None,Even,Odd,Space,Mark
- Baud Rate
- TTL: 600 bps ~ 1024K bps
- Flow Control
- RTS/CTS
- Buffer
- send and receive 2k bytes respectively
- RS-485 Pull-up and Pull-Down Resistor
- null,reserved 485 send-receive control pin
Software
- Virtual Serial(USR-VCOM)
- Windows 2000 or higher(32 bit/64 bit)
- Configuration
- built-in webpage,computer set-up software,serial command
Basic Parameter
- Size
- 44.45 x 31.75 x 15.4 (mm) (including pin)
- Operating Temp.
- -40 ~ 85°C(industry)
- Storage Temp.
- -40 ~ 85°C,5 ~ 95% RH(no condensation)
- Input Voltage
- DC 3.3 / 5 V
- Working Current
- 120mA(115~125)@ 3.3V
120mA(115~125)@ 5V
- Power
- <1W
More
- Certificate
- CE,FCC,ROHS
- Warranty
- 2 years
- Accessory
- null
Be the first to review “TCP232-ED2”
Reviews
There are no reviews yet.