Product Info

The Ag321T is a 12V DC input wireless power transmitter module; designed to work with the matched Ag320R  and Qi compatible 15W wireless power receivers. Typically used in higher power wireless charging applications.

Complementry Module Pair Ag321T (Transmit Power) & Ag320R (Receive Power)
Up to 15 Watts Wireless Power
Low profile DIL package modules
12V Input
Automatic Compatible Receiver Verification
Low bit rate (4 bytes/s) user Accessable data transfer to Ag321T
Overload & Short-circuit Protection
Low Standby Power Consumption

Ag321T Evaluation Board

This is a Qi 15W wireless transmitter evaluation kit for the Ag321T transmitter module, supplied complete with a transmitter coil fitted and with the EVALAg320R for a complete end-to-end wireless power Eval system.  Evaluation boards only available as a kit to include both EvalAg321T and EvalAg320R.

Contact Us

    Name *

    Email *

    Product Info

    Silvertels’ Ag300 series are a range of wireless power modules, typically used for wireless charging. Using Silvertel modules, wireless power transfer products can be quickly designed by the simple addition of a compliant coil. Ag320T and Ag320R are a high power 15W output solution for heavier duty applications than the standard Ag301/312 solution. Ag320R shown here is a 15W output wireless power receiver module, providing a 12V regulated output, to aid the effortless, fast design of higher power wireless charging products. Ag320R is used exclusively with the Ag320T transmit power module for an end to end cost effective design.

    ·  Compact, low profile module
    ·  Up to 15 Watts Output Power at 12V
    ·  Overload and short-circuit protection
    ·  Minimal low cost extra components
    ·  Overload and short circuit protection
    ·  Automatic transmitter identification

    Features

      • Compact low profile 15W wireless power receive modules
      • Module size Ag320R – 33 x 29mm
      • Compatible and for use only with Ag320T transmit power module
      • Up to 15 Watts Output Power, 12V @ 1.25A)
      • Automatic transmitter identification
      • Safety features: Over current and short circuit protection
      • Low standby power consumption
      • Minimal low cost extra components
      • List of recommended compatible coils available

    Ag320R Evaluation Board

    This evaluation board kit is designed for testing of the Ag320R wireless power receiver module but should be used in conjunction with the EvalAg320T. The 12V output is available on connector J1 pins 1 and 2 or the center pin of connector J2. 0V is available on J1 pins 3 and 4 or the outer ring of J2. It is supplied complete with an compatible wireless receiver coil.  Evaliation boards only availabe as a kit to include both EvalAg320T and EvalAg320R.

    FOR PRICE QUOTE & FREE SAMPLES, PLEASE FILL THE FOLLOWING FIELDS:

      Name *

      Company Name*

      Phone*

      Email *

      Product Info

      The Ag320T is a 12V DC input wireless power transmitter module; designed to work with the matched Ag320R wireless power receiver, typically used in higher power wireless charging applications.

      ·  Compact, low profile DIL module
      ·  12V DC input voltage
      ·  Designed for higher power 15W output
      ·  Low standby power consumption
      ·  Small Footprint Package
      ·  Just add a coil for a complete transmitter
      ·  Overload and short-circuit protection
      ·  Foreign object detection

      Features

        • Compact low profile 15W wireless power transmit modules
        • Module size Ag320T – 33 x 29mm
        • Compatible and for use with Ag320R receive power module
        • Up to 15 Watts Output Power (Ag320R, 12V @ 1.25A)
        • Automatic receiver identification
        • Foreign object detection
        • Safety features: Over current and short circuit protection
        • Low standby power consumption
        • Minimal low cost extra components

      Ag320T Evaluation Board

      This is a 15W wireless transmitter evaluation kit for the Ag320T transmitter module, supplied complete with a transmitter coil fitted. It can be matched with the EVALAg320R for a complete end-to-end wireless power Eval system.  Evaliation boards only availabe as a kit to include both EvalAg320T and EvalAg320R.

      FOR PRICE QUOTE & FREE SAMPLES, PLEASE FILL THE FOLLOWING FIELDS:

        Name *

        Company Name*

        Phone*

        Email *

        Product Info

        The Ag312 is a 5V DC input wireless power transmitter (A5/A11) module; designed to work with the Ag301 or any other Qi compliant wireless power receiver, typically used in wireless charging applications.

        ·         Compact, low profile module
        ·         5V DC input voltage
        ·         Designed for Qi Compatibility
        ·         Low standby power consumption
        ·         Small Package
        ·         Just add a coil for a complete transmitter
        ·         Overload and short-circuit protection
        ·         Foreign object detection

        Features

          • Compact low profile Qi compatible Transmit power modules
          • 5V DC input voltage
          • Module size: Ag312 – 33 x 29mm
          • Up to 5 Watts Output Power (Ag301)
          • Automatic receiver identification
          • Foreign object detection
          • Safety features: Overload and short-circuit protection
          • Low standby power consumption
          • Only a transmit coil needed

           

        Ag312 Evaluation Board

        This is a fully Qi compatible evaluation kit for the 5V DC input Ag312 transmitter module, supplied complete with a Qi type A5 transmitter coil fitted. It can be matched with the EVALAg301 for a complete end-to-end wireless power Eval system.

        for price quote & free samples, please fill the following Fields:

          Name *

          Company Name*

          Phone*

          Email *

          Product Info

          The Ag311 is a wireless power transmitter (A1/A10) module; designed to work with the Ag301 or any other Qi compliant wireless power receiver, typically used in wireless charging applications.

          ·         Compact, low profile module
          ·         Designed for Qi Compatibility
          ·         Low standby power consumption
          ·         Small Package
          ·         Overload and short-circuit protection
          ·         Foreign object detection

          Features

            • Compact low profile Qi compatible Transmit & Receive power modules
            • Module sizes: Ag311 – 33 x 29mm
            • Up to 5 Watts Output Power (Ag301)
            • Automatic receiver identification
            • Foreign object detection
            • Safety features: Overload and short-circuit protection
            • Low standby power consumption
            • Minimal low cost extracomponents

             

          Ag311 Evaluation Board

          This is a fully Qi compatible evaluation kit for the Ag311 transmitter module, supplied complete with a Qi type A1
          transmitter coil fitted. It can be matched with the EVALAg301 for a complete end-to-end wireless power Eval system.

          for price quote & free samples, please fill the following Fields:

            Name *

            Company Name*

            Phone*

            Email *

            Product Info

            Silvertels’ Ag300 series are a range of wireless power modules designed for Qi compliance. They are aimed at Wireless Power applications, and would typically be used for wireless charging. Wireless power transfer products can be quickly designed by the simple addition of a compliant coil. Ag301 shown here is the wireless power receiver module, aiding the effortless, fast design of Qi compliant wireless charging products.

            Compact, low profile module
            Minimal low cost extra components
            Up to 5 Watts Output Power

            Designed for Qi Compatibility
            Overload and short-circuit protection
            Automatic transmitter identification

            Features

            • Compact low profile Qi compatible Receive power module
            • Module sizes: Ag301 – 31.2 x 23mm
            • Up to 5 Watts Output Power (Ag301)
            • Automatic receiver identification
            • Foreign object detection
            • Safety features: Overload and short-circuit protection
            • Low standby power consumption
            • Minimal low cost extra components

            for price quote & free samples, please fill the following Fields:

              Name *

              Company Name*

              Phone*

              Email *